How to Connect Haf X Full Tower Fans to Mobo

FAQ for HAF X

– When wish the HAF X be available?

The HAF X street accessibility wish cost early June
worldwide.

– How do I practice the Nvidia GTX 480 ducting and what is
the best resolution for nVidia certifiable cooling?

There are 3 starring components of the GTX 480, GTX 470
SLI-certification: The GPU duct, the side devotee duct and the GPU duct
fan.
The GPU duct buff requires a extremely high airflow 150cfm fan with at
least a
120x38mm specification. This specification was developed by nVidia.
Adding a replaceable high performance fan wish as wel reach the same chilling
effects. To set up with 3-way SLI, first remove all the
components. Mount the cards, and install the GPU duct, GPU duct fan,
then
the side panel with 200mm duct. The GPU bearer can be used instead of
the
go with fan duct, but will not meet the nVidia engineered requirements for
cooling.

– How do I use the GPU bracket?

With the computer installed and the graphics cards
screwed in place, assemble the front of the GPU bracket. Attach the
optional 80mm x 15mm R4-SPS-20AK-GP slim rooter. If the GPU are
apart by a single time slot, pull the fingers of the GPU bracket off and
adjust
to a further apart posture. With the GPU fingers in set up, iron out them
against the cards spell screwing in the adjustment in the game of the
HAF
X. Guarantee the GPU bracket is parallel with the GPU cards and
perpendicular to the physique back frame.

– Why are there 9 PCI slots?

HAF X uses 9 expansion slots for 3 and 4-way SLI and
Crossfire X support. With elite motherboards, a HAF X wish allow the
GPU to be fixed to the human body firmly. For additional support the GPU
retention bracket, can reinforce the lower cards. Banknote that the ATX
monetary standard calls for 7 expansion slots and certain motherboards will not
use the
first two slots. With 9 slots, the HAF X bequeath maintain the 7 slot
standard fifty-fifty using the largest motherboards.

– How are the HAF X made and what are they successful of?

The HAF X is successful from .8mm SGCC steel, with ABS
constructive. The entire chassis is ROHS certified materials. HAF X is
manufactured exclusively by Cooler Master on our possess machinery in ISO
9001,
9002 and 14001 certified facilities.

– How do I use the front unpleasant-swap bays?

The bays should be gripped from the sides and mildly
penurious together to release the tray. Once the tray is removed, the
hard
force crapper be screwed like a shot to the tray. The tray must be gripped
firmly and installed straight in to contact the rear backplane. SATA
cables are directly attached from the backplane to the motherboard for a
immediate
connection.

– How cause I use the SuperSpeed USB 3.0 ports?

HAF X is the first easy full tower chassis with
USB 3.0 support. Presently the NEC controllers on USB 3.0 motherboards
do
not put up a exchangeable header. To employ the USB 3.0 ports, route the
extension cables from the I/O behind the motherboard and through the
rear hole
in the motherboard tray. You terminate then use one of the three rubber H2O
cooling ports on the rear of the chassis to meet the USB 3.0 interface connected the
motherboard. As soon as a better solution is free with a standard
USB
3.0 motherboard header connected chip, Cooler Passkey testament provide the internal
header
USB 3.0 cables as a freed set out exchange.

– How behave I mount a radiator on the top?

HAF wish support a 240, 360, or 280mm radiator with
no adjustment. Remove the top 200mm fan, and function the 8 holes to
attach to
the radiator. The top dialog box must be removed by pressing connected the internal
plastic clips within the chassis. Some extreme radiators over 60mm
blockheaded,
or too heavy may run into some issues in support, although most 360mm
radiators
will be accommodated with zero issues.

– What is the proper order of fabrication?

First remove altogether the ducting. These ducting
should be added afterwards installation of the motherboard, fans and television
cards. Make sure to set u the CPU cooler before installing the
motherboard since many motherboard layouts use different Central processing unit socket
locations. Put in the power supply partition later the PSU is
installed. Then install the GPU duct afterward the GPU are installed.

– What is the largest case motherboard that rear live
installed?

HAF X will support ATX, EATX and some non-standard
sizes. Please note that some motherboards from EVGA follow non-standardised
layouts. The HAF X wish support the EVGA X58 Classified 4-Way SLI
motherboard with optional 4-way SLI support. There is not enough profundity
or
breadth available to bear the EVGA Classified Atomic number 38-2 because the
motherboard is
of a non standard layout and is 15 inches wide. This is over 2 inches
longer than the interior of the chassis.

– What is the maximum GPU length supported?

Television card game can be up to 342mm or 13.46 inches.
Delight note that using the GPU ducting, or strange fan mounting on the
disk drive
bays, will reduce the headway by up to 40mm.

– What is the maximum CPU tank height supported?

The HAF X volition financial support all modern coolers including
the V6, V8, V10 and any cooler under 175mm in to.

– What is the maximum PSU duration supported?

HAF X volition keep going all modern PSU from 160mm to over
210mm. Note that thirster PSUs will be draped by the great power provide
partition.

How to Connect Haf X Full Tower Fans to Mobo

Source: https://www.legitreviews.com/cooler-master-haf-x-black-gaming-case-review_1311/8